Recently in Demos Category

Stamp Making Tutorial

| No Comments

22inked-stamp.jpg

Here is a link to a great primer on how to create your own rubber stamps with the laser cutter. This tutorial was created by Limor Fried creator of the equally useful and interesting business Adafruit Industries (where lots of useful information on DIY electronics projects can be found).

28stamp-complete.jpg

Her tutorial is based off of the Epilog laser cutter but the same stamp making features can be found on the Universal Laser Systems cutter as well. In her tutorial she utilizes rubber which can be purchased here on LaserBits Inc. a great source for purchasing different materials to laser cut and etch.

Samples

| No Comments

This post contains samples created with the ILS12.150D Universal laser cutter (Big Red). All the samples were created at 100% speed with different degrees of power for each grayscale strip.


img000.jpg

This is the digital image used to print each of the samples. The difference in darkness of each of the horizontal grayscale strips in the samples is due to the different degrees of power being incrementally applied to each strip.


img001.jpg

Bamboo


img002.jpg


img003.jpg

MDF


img004.jpg


img005.jpg


img006.jpg


img007.jpg


img008.jpg

Birch Veneer MDF


img009.jpg

Masonite


img010.jpg

Masonite With Layer Of Gesso Paint


img011.jpg

Whiteboard


img012.jpg

One Sided Frosted Acrylic


img013.jpg


img014.jpg

Synthetic Fabric


img015.jpg

Transparencies


img016.jpg

Kozo Paper


img017.jpg

Velum


img018.jpg

Felt


img019.jpg

Canvas


img020.jpg

Vinyl


img021.jpg

Foam Pad


img022.jpg


img023.jpg

Coark


img024.jpg

Blotting Paper


img025.jpg

Cardboard


img026.jpg

Linoleum


img027.jpg

Glass

img028.jpg

Masonite With Layer Of Black Gesso Paint