Plant Path Printer

| No Comments

(Try saying that three times fast!)

There have been some problems with the printer in Plant Path -- namely, that the CBORD (the thing where you swipe your UCard) screen is going blank. It is still able to read the cards, but there is no indication on the CBORD itself that the card is recognized.

Fortunately there's a quick fix to this problem. If you have this happen during one of your shifts, look at the back of the CBORD -- there's a large-ish black and silver connector cable in the middle. Try jiggling the connector back and forth, and then finally push it as far as it will go into the back of the box. We'll work on permanently fixing this problem soon, but for now, we'll go the low-tech route.

Please ask Elisabeth if you have any questions about this issue!

Leave a comment

June 2013

Sun Mon Tue Wed Thu Fri Sat
2 3 4 5 6 7 8
9 10 11 12 13 14 15
16 17 18 19 20 21 22
23 24 25 26 27 28 29
Powered by Movable Type 4.31-en